L-Bar Sealer Features and Benefits:
| FEATURE: | BENEFIT: |
| Extra strong Grade 5 or Grade 8 Bolts are used on all machinery. When possible, flange nuts are used as well. | Exceptionally strong component bonding and sturdiness keeps machine vibration to a minimum. |
| All painted surfaces are finished with POWDER COATING. | Toughest and most durable painted surface finish available. Fully cured to resist scratching. FDA approved and environmentally safe. |
| SEAL-A-TRON uses T&B electrical connectors exclusively, the best and most expensive on the market. | Better wire crimping and superior holding power on quick disconnect terminals. Virtually NO electrical problems. |
| Casters are standard on all manual equipment. Each caster is designed to carry a 300 lb. load. A positive wheel brake is provided on each caster. | Machines are easily moved without caster damage. The positive locking brake system allows for safe operation. |
| Heavy duty sheet metal construction with welded reinforcements. | Rugged and sturdy machinery insures long life. |
| No smoke sealing system achieved through perfect balance of substantial pressure and digitally controlled wire temperature. | Clean smoke free air in the working environment. |
| State of the art, reliable digital solid state TRU-TEMP™ microprocessor with solid state power switching. | Accurate temperature control. Seal Wires are guaranteed for 6 months! Strong seals and long wire life. All sealers plug into 120 VAC. |
| Perfectly smooth seal bed (easy adaptation for PVC sealing). | Able to seal with lower temperatures. Teflon tape lasts longer. |
| NEW hi-tech composite TFE coated beads as seal wire backing. | Smooth straight backing surface helps to reduce wire temperature. Composite beads increase wire life due to better cross-over control. |
| Strongest magnets in the industry. | Outstanding seal pressure. Strong seals, increased wire life. |
| Easy adjust magnet pads. | Quick "fine tuning" of seal pressure. |
| Heavy duty anodized aluminum extrusion Seal Head. | Uniform sealing through elimination of warping and deflation. |
| Extra long and strong spring for seal wire expansion. | Allows the seal wire to expand without kinking. |
| Anti-rotation, anti-twist seal wire take-up connector. | Prevents shorting out of the seal wire resulting in longer seal wire life. |
| Permenant 2-inch heat sink (shunt) at each seal wire. | Allows the seal wire to expand without HOT-SPOTS, thus increasing wire life. |
| New: EZ-PERF™ film dispenser with film roll closer to the floor. | Small holes placed on both the top and bottom layer of film to control air evacuation. |
| New: EZ-PULL™ film dispenser with heavy duty POSI GUIDES |
Reduces operator fatigue, keeps film centered. |
| LITE-TUCH™ seal head. | Reduces operator fatigue, thus increasing production |
| Modular construction with bolt-on infeed. | Allows many options to be added at a later date such as discharge conveyor, PFU, magazine fed automatic infeed, etc... |
| Easy accessible control panel. | Allows service technician to fine tune the sealer while the operator is running the machine. |
| Heavy duty product take away conveyor with POSI-TRAK™. | Accurate, reliable belt tracking. |
| Soft start vari-speed for discharge conveyor. | Prevents shingling of multiple layered product and allows to match the conveyor speed with the shrink tunnel speed. |
| Endless dove-tailed fused vinyl conveyor belts. | Reliable belt tracking, thus longer life. |
| "Quick adjust" height alignment of discharge conveyor. | Fast product height adjustment for easy positioning. |
| Digital display temperature controller. | Reliable temperatures to ±2°F. |
| Unique SURROUND AIR™ feature surrounds the package on all surfaces with hot air. | Superior shrink : better reduction of "dog ears". |
| VARILOCETY™ 3400 infinite speed control of the blower wheel with a 2 HP 3 phase motor from 1000 to 3400 rpm, while the machine remains single phase. | A "Big Machine" option on a compact system for excellent packaging results. Reduces "dog ears" and "crow's feet". |
| Programmable COOL-DOWN cycle. | Blower and conveyor keep running without heat until the temperature has reached a safe level, then shuts off. |
| Extra quiet high temperature blower motor with large radial fan. | Silent running with lots of air velocity (pressure). |
| High wattage 3" diameter wound CALROD heating elements. All electrical hook-up to heaters are not in the hi-temp area. | Runs at 208 or 240 Volts without changing heating elements. Quick heating and rapid recovery between on/off cycles. Extremely long heater life. |
| Variable speed heavy duty DC Conveyor Drive Motor. | Instant adjustment to conveyor speed for quick fine tuning. |
| D-3 #40 Pin chain with 3/4" long pin. | Heavy duty design, extra pin length prevent rollers from falling out, particularly during shipping. |
| Standard, silicone covered live rollers. | Efficient product take away with medium maintenance conveyor. Live roller conveyors always produce the best looking shrink on the bottom of the package. |
| Optional: Teflon covered live rollers. | Teflon covered rollers last up to 10 times longer than covered with silicone. Live roller coneyors always produce the best looking shrink on the bottom of the package. |
| NEW: Glass filled nylon belt. Available on all models. | Virtually maintenance free. CAUTION: Slight impressions of the belt may be visible on the bottom of the package in some cases. |
| ADJUSTA™ stand available on all shrink tunnels. | Allows tunnel infeed height to line up with the L-Bar Sealer's discharge conveyor height resulting in a smooth transfer from sealer to tunnel. |
| Baffle air volume control for air to the bottom of the package. | Enables the operator to decrease airflow to the bottom of the package by 95% to accomodate light products. |
| KOOL-TUCH™:Keep the exterior of the tunnel cool while maintaining operating temperature inside. | User friendly. Provides operator with a safe, comfortable work environment, without getting burned. |
HOME |
SALES | LITERATURE
* 3815 S.E. Naef Rd. * Portland, OR 97267
Phone (503) 652-5200 * Fax (503) 905-1331